How Does a Beer Keg Tap Work?
Whenever family and friends have a party or go out for a picnic, they usually have beer kegs available. Thirsty people need to drink a lot so the keg is really cost effective and could save money. A keg tap is a device that allows you to release the beer into your drinking cup from the keg. It is easy to use a keg tap but you must be careful not to waste beer if you are not sure how to do it correctly. You can splash foam all over you or all over your face. Getting beer from a keg tap looks easy but it is not as easy as it looks.
The release of the beer is regulated by the keg tap. This uses a lever and through pulling and pressing it, the beer is released. When pressure is released, it pushes the beer up and into the glass. The keg tap is technically a switch and may be an on-off or a close-open switch.
To minimize the foam it creates when pouring, place the beer keg in a steady position for a short while; the beer keg should be directly in front of you. The foam builds up when the keg is transported especially when there is too much movement. When you have placed the keg where you plan to serve beer, let it stay for a while, because this will help to minimize the foam. It is harder to tap with the cap or seal so you should remove it. However, the pros do not remove the cap or seal because they will not put the beer at risk like you will. If you will do it, you need to play it safe.
With a portable keg system, you tap with CO2. Party pump is when pressure is receive by the keg in a single unit pump and tap combination. The beer keg tap is separated from the keg. You attach the pump, and the faucet must be opened so that the pressure in the keg is released. Air pressure is applied to the keg by pumping and when the lever is pushed, which is the tap handle, beer is released.
A pony keg or portable beer keg should be consumed in one day because the beer loses its flavor once the air is mixed with the beer. An on and off valve is used in a traditional keg. This traditional keg does not need air pressure since it works using gravity. In this type, you can get your beer by sampling opening or closing the keg when the valve is used.