What Has Changed Recently With Communities?

Timber Protection

The study of wood as a renewable material and organic material is what is known as wood science. The processes and the tools used to utilize the material is what is known as wood technology. Wood is treated as a material in direct comparison with other products. The wood is checked against the other materials properties, performances, value, and work-ability. The many Merits of timber and these technologies improve wood to be superior over other products. The wide range of products where wood can be used is just one of the many advantages that give wood an upper hand over other products. It is also based on renewable resources. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.

The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. The biggest threat to wood being moisture and insects has to be kept away from the wood. The water particles in the timber increase the rotting and the insects bore through the wood. Many methods are available in the treatment of wood one of the most common being the ACQ – alkaline copper Quaternary. This is a copper-based preservative that is applied to the wood for protection. Although being a good method to use for wood protection it has presents some few challenges. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The species of the wood and the application of the wood will determine how many chemicals will be used on the wood. The level of chemical concentration will be determined by where the piece of wood is going to be put to use.

Many methods are being invented to protect the wood, and one of them is the copper metal method. This method is being accepted fast because is friendly to wooden fasteners. This process is what in other words called the micronized copper wood preservative. A high-pressure liquid that has the copper metal mixed in it is driven into the wood. The difference between this method and the other copper-based methods is that the copper is used as a metal rather than a dissolved material. This process is highly effective and the wood properties and heightened. The timber treated in this way is used in both outdoor and indoor frames that last very long.

The micronized copper preservative has proven to be highly effective in protecting the wood against fungal decay and termites. Unlike other methods of treatment this method is not corrosive. When you use this method to treat wood, then you will not need to worry for at least ten years.